2.      L3 cache varies with CPU

(Please refer “CPU Support List” for more information.)

2.      Support for DDR4 2933/2666/2400/2133 MHz memory modules

3.      Intel® Core™ i5/i3/Pentium®/Celeron® processors:

4.      Support for DDR4 2666/2400/2133 MHz memory modules

5.      2 x DDR4 DIMM sockets supporting up to 64 GB (32 GB single DIMM capacity) of system memory

6.      Dual channel memory architecture

7.      Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)

8.      Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules

9.      Support for Extreme Memory Profile (XMP) memory modules

(Please refer “Memory Support List” for more information.)

1.      1 x D-Sub port, supporting a maximum resolution of 1920×1200@60 Hz

2.      1 x HDMI ports, supporting a maximum resolution of 4096×2160@30 Hz

* Support for HDMI 1.4 version and HDCP 2.3.

Maximum shared memory of 512 MB

2.      High Definition Audio

3.      2/4/5.1/7.1-channel

* To configure 7.1-channel audio, you need to open the audio software and select Device advanced settings > Playback Device to change the default setting first. Please visit GIGABYTE’s website for details on configuring the audio software.

1.      1 x PCI Express x16 slot, running at x16

2.      2 x PCI Express x1 slots

(The PCI Express slots conform to PCI Express 3.0 standard.)

Supports up to ASPM L1.2 power management protocols.

2.      4 x SATA 6Gb/s connectors

* Refer to “1-7 Internal Connectors,” for the installation notices for the M.2 and SATA connectors.

M.2 connectors support up to ASPM L1.2 PCIe power management protocols.

1.      4 x USB 3.2 Gen 1 ports (2 ports on the back panel, 2 ports available through the internal USB header)

2.      6 x USB 2.0/1.1 ports (4 ports on the back panel, 2 ports available through the internal USB header)

2.      1 x 8-pin ATX 12V power connector

3.      1 x CPU fan header

4.      1 x system fan header

5.      1 x RGB LED strip header

6.      4 x SATA 6Gb/s connectors

7.      1 x M.2 Socket 3 connector

8.      1 x front panel header

9.      1 x front panel audio header

10.  1 x USB 3.2 Gen 1 header

11.  1 x USB 2.0/1.1 header

12.  1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only)

13.  1 x serial port header

14.  1 x Clear CMOS jumper

2.      1 x D-Sub port

3.      1 x HDMI port

4.      2 x USB 3.2 Gen 1 ports

5.      4 x USB 2.0/1.1 ports

6.      1 x RJ-45 port

7.      3 x audio jacks

2.      Temperature detection

3.      Fan speed detection

4.      Overheating warning

5.      Fan fail warning

6.      Fan speed control

* Whether the fan speed control function is supported will depend on the cooler you install.

2.      Use of licensed AMI UEFI BIOS

3.      PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

* Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.

@BIOS

Ambient LED

EasyTune

Fast Boot

Game Boost

ON/OFF Charge

Smart Backup

System Information Viewer

2.      Support for Q-Flash

3.      Support for Xpress Install

Realtek® 8118 Gaming LAN Bandwidth Control Utility

Most hardware/software vendors may no longer offer drivers to support Win9X/ME/2000/XP. If drivers are available from the vendors, we will update them on the GIGABYTE website.